Kaspersky TDSSKiller 3.1.0.26

Kaspersky Internet Security 2016

Kaspersky TDSSKiller

Kaspersky TDSSKiller is a small powerful tool to detect and remove rootkits, malicious programs that surreptitiously introduced into the system and hooks system functions. Kaspersky TDSSKiller designed to combat malware family Rootkit.Win32.TDSS (Tidserv, TDSServ, Alureon); bootkit; rootkits. Works without installation and can be run as a normal and safe mode. It supports 32-bit and 64-bit operating systems.

Kaspersky Lab has developed the TDSSKiller utility that allows removing rootkits. 

The utility supports 32-bit and 64-bit operation systems. 
The utility can be run in Normal Mode and Safe Mode.

It detects and removes the following malware:

malware family Rootkit.Win32.TDSS;
bootkits;
rootkits.

List of malicious programs:

Rootkit.Win32.TDSS, Rootkit.Win32.Stoned.d, Rootkit.Boot.Cidox.a, Rootkit.Boot.SST.a, Rootkit.Boot.Pihar.a,b,c, Rootkit.Boot.CPD.a, Rootkit.Boot.Bootkor.a, Rootkit.Boot.MyBios.b, Rootkit.Win32.TDSS.mbr, Rootkit.Boot.Wistler.a, Rootkit.Win32.ZAccess.aml,c,e,f,g,h,i,j,k, Rootkit.Boot.SST.b, Rootkit.Boot.Fisp.a, Rootkit.Boot.Nimnul.a, Rootkit.Boot.Batan.a, Rootkit.Boot.Lapka.a, Rootkit.Boot.Goodkit.a, Rootkit.Boot.Clones.a, Rootkit.Boot.Xpaj.a, Rootkit.Boot.Yurn.a, Rootkit.Boot.Prothean.a, Rootkit.Boot.Plite.a, Rootkit.Boot.Geth.a, Rootkit.Boot.CPD.b, Backdoor.Win32.Trup.a,b, Backdoor.Win32.Sinowal.knf,kmy, Backdoor.Win32.Phanta.a,b, Virus.Win32.TDSS.a,b,c,d,e, Virus.Win32.Rloader.a, Virus.Win32.Cmoser.a, Virus.Win32.Zhaba.a,b,c, Trojan-Clicker.Win32.Wistler.a,b,c, Trojan-Dropper.Boot.Niwa.a, Trojan-Ransom.Boot.Mbro.d, e, Trojan-Ransom.Boot.Siob.a, Trojan-Ransom.Boot.Mbro.f.


Homepage : http://support.kaspersky.com/virusesutility#TDSSKiller

How to disinfect a compromised system

1. Download the TDSSKiller.zip archive and extract it into a folder on the infected (or possibly infected) computer with an archiver (WinZip, for example);

2. Run the TDSSKiller.exe file;

3. Wait until the scanning and disinfection completes. A reboot might require after the disinfection has been completed.
Share:

cFosSpeed 10.27 Build 2334 Beta/ 10.26 Build 2312

cFosSpeed

cFosSpeed

cFosSpeed is an Internet Accelerator with Bandwidth Management and Traffic Shaping. It increases your throughput and reduces your Ping. Whenever you access the Internet with more than one data stream cFosSpeed can optimize the traffic. The program attaches itself as a device driver to the Windows network stack where it can then perform packet inspection and layer-7 protocol analysis. Ping optimizer plus packet prioritization. Traffic Shaping is a method for optimizing the Internet traffic. It allows maximum speed while ensuring minimal Ping. Outgoing traffic is not sent out indiscriminately. Instead, data packets are first queued and then sent out in order of their priority. This way, data that is needed immediately is transmitted before less time-critical data.

cFosSpeed also reduces network congestion for downloads by lowering the TCP window size to keep the sender from sending too much data at once. In addition, cFosSpeed contains a packet filter firewall, time and volume online budgets, a skinnable transfer monitor and several other special purpose features. It has a filter language that allows experts to write their own traffic classifications.

• Improve your Ping for online games
• Keep your internet fast during heavy upload/download
• NEW: Improve mobile Internet
• Reduce audio/video streaming problems
• Improve VoIP speech quality

cFosSpeed supports a wide variety of connections, like DSL, ADSL, VDSL, Cable, Modem, ISDN, Mobile (GSM, GPRS, HSCSD, UMTS, HSDPA), File sharing (P2P), Online Games, VoIP, Streaming Media, and Tuning. You can use cFosSpeed with a router and/or a DSL-modem or cable-modem. With cFosSpeed improve your Ping for online games, keep your internet fast during heavy upload or download, improve mobile Internet, improve VoIP speech quality, and reduce audio/video streaming problems.

Highlights:
• cFosSpeed prevents one application (e.g. sending email) from choking all others, like telephone calls, chat, etc.
• cFosSpeed keeps your ping times low, so you can play online games and download files simultaneously.
• All important data packets are automatically prioritized over unimportant ones. With the cFosSpeed program and protocol prioritization you can configure your applications ideally and/or add new Programs.
• Real-time analysis of your data: With the new status window you can easily recognize which data streams you are currently transfering.
• cFosSpeed runs with DSL, Cable, WLAN, CDMA2000, UMTS, WCDMA, Modem, ISDN, broadband mobile (2G / 3G).
• Here a detailed explanation of cFosSpeed’s Traffic Shaping.


Homepage : https://www.cfos.de/en/index.htm

Changelog : http://www.cfos.de/en/cfosspeed/whats-new.htm
Share:

Mp3tag 2.91h

Mp3tag

Mp3tag

Mp3tag is a powerful and yet easy-to-use tool to edit metadata of common audio formats where it supports ID3v1, ID3v2.3, ID3v2.4, iTunes MP4, WMA, Vorbis Comments and APE Tags. It can rename files based on the tag information, replace characters or words in tags and filenames, import/export tag information, create playlists and more. Mp3tag supports online database lookups from, e.g., Amazon, discogs, or freedb, allowing you to automatically gather proper tags and cover art for your music library.

Mp3tag supports the following audio formats:

* Advanced Audio Coding (aac)
* Free Lossless Audio Codec (flac)
* Monkey's Audio (ape)
* Mpeg Layer 3 (mp3)
* MPEG-4 (mp4 / m4a / m4b / iTunes compatible)
* Musepack (mpc)
* Ogg Vorbis (ogg)
* OptimFROG (ofr)
* OptimFROG DualStream (ofs)
* Speex (spx)
* Tom's Audio Kompressor (tak)
* True Audio (tta)
* Windows Media Audio (wma)
* WavPack (wv)


Homepage : https://www.mp3tag.de/en/

Changelog : https://www.mp3tag.de/en/changelog.html
Share:

JRiver Media Center 24.0.74

JRiver Media Center

JRiver Media Center

JRiver Media Center - all-in-one media management app turns any Windows PC into an entertainment hub for complete control of your digital media: Audio, Video, Images, and Television. It connects PC to stereo, TV, remote control devices, digital cameras, scanners, and portable MP3 players. It plays all media, rips, burns, and organizes all your music, images, and video. MC encodes and plays all popular media formats. Powerful utilities include Media Server for streaming music and images to remote PCs. Media Center is more than a world class player. It’s also a Media Network, a whole house music, movie, TV, and photo solution. The leader in audiophile quality sound. The most powerful media database available; an essential tool for large collections.

Features:

Audio
* Native support of DirectShow DSP filters
* Audiophile – WASAPI exclusive output using high-end USB DACs
* Audiophile – Added ability to play files from memory instead of disk
* Audiophile – Support for high end USB DAC’s with WASAPI
* Headphone DSP makes listening more natural and comfortable.
* SoundcardSwitch command for the launcher, allows soundcard selection
* 3D album view adjusts text size to display more tracks when necessary
* 3D album view allows playing, adding, shuffling, and adding as next to play

Images
* Image Preview allows zoom from a thumbnail to rotate, delete, compare, edit, and more
* Image thumbnail frames (optional)
* Photoshop PSD file support
* Single command copy / send to an editor like Photoshop, and stack new image with original

Video
* Video tagging using sidecar files
* Chapter Support for MKV and MP4
* Chapters added to On Screen Display
* Info Panel displays metadata

Television
* Added new “watched” column to metadata
* EPG can automatically retrieve XMLTV data
* Automatic correlation of XML channel names and MC channel names
* Info Panel displays metadata, including TV program art
* TV program art from YADB

Theater View
* Watch Hulu and YouTube from Theater View
* Customizable nested views in Theater View
* Customizable File Info panel to display metadata
* Speed and quality enhancements
* Custom backgrounds
* Touch screen support
* On screen clock

Remotes and Servers
* Wiki articles: Remotes and Servers
* Remote Relay using IR transceivers for controlling a set top box or receiver
* Remote Setup Wizard
* Media Center Remote learning and blasting
* Media Center can connect to another Media Center to act as a remote (TRemote)
* New HID remote control plug-in – supports shortcuts with keyboard, mouse, & gamepad
* Remote control with REST based Web Service Interface in Library Server
* Library Server supports read and write to allow for shared, multi-user database access
* DLNA added to the UPnP Server
* Library Server clients can write changes back to server
* Library Server connections allow playback on server as Playing Now zones


Homepage : https://www.jriver.com/

Changelog : https://yabb.jriver.com/interact/index.php/topic,118512.0.html
Share:

Bitsum ParkControl Pro 1.3.1.6

Bitsum ParkControl Pro

Bitsum developed ParkControl because core parking settings are hidden in Windows, but can make such a large difference on performance, particularly when there are bursting CPU bound loads (the most common type).

Core Parking
Core Parking is a sleep state (C6) supported by most newer x86 processors, and newer editions of Windows. Core Parking dynamically disables CPU cores in an effort to conserve power when idle. Disabled cores are re-enabled as the CPU load increases once again. This technology is very similar to frequency scaling, in that it seeks to throttle the CPU when idle.

The problem is that Window’s default power profiles are configured far too aggressively when it comes to core parking, especially on workstations. Their interest was in conserving energy, even if this meant marginally decreasing performance. A number of complex parameters control when a core should be parked, and Microsoft tuned heavily towards power savings.

The core parking settings in Windows are implemented as parameters of power plans (aka power profiles). That means you can, for example, disable core parking for the High Performance power plan, but leave it enabled for other plans. And that is exactly the desired tweak for most users: disable parking only for high performance power plans.

Efficacy
Empirical evidence shows that disabling core parking can make a real difference in system performance. There are many factors that will determine how efficacious it will be for any given system, including the CPU type, application load, and user behavior. However, we find that Windows is often over-aggressive in its core parking, resulting in excess latency as cores are unparked to accommodate bursting loads (the most common type of CPU load).

In our tests, we’ve found AMD processors benefit most from disabling core parking. This is perhaps due to the dramatic difference in the way AMD processors share (hardware) computational resources between logical cores. Microsoft optimized for Intel’s HyperThreading, which has much less capable secondary cores. AMD’s secondary logical cores are near full CPUs.

YMMV, but if we didn’t see real and substantial performance gains after disabling core parking, we wouldn’t have authored this utility.

Safety
These tweaks are entirely safe for any PC that is constructed properly. The only way that they could possibly seem to cause some change in behavior is if the PC has overheating issues. In such an event, those issues would be seen regardless of these tweaks by simply placing a sustained high load on the CPU.


Homepage : https://bitsum.com/

Changelog : https://bitsum.com/parkcontrol/
Share:

HitmanPro.Alert 3.7.9 Build 773

HitmanPro.Alert

HitmanPro.Alert 3

HitmanPro.Alert is a lightweight application able to monitor your browser activity and detect potential threats that may comprise system security. The tool was specifically built to add an extra layer of security to your system, in order to protect you whenever you shop on the Internet or perform online banking operations. It offers real-time PC protection against software exploits, drive-by downloads, crypto-ransomware, online fraud, and identity theft.

Intuitive interface and malware scans
The tool sports an attractive and clear-cut interface, and offers to perform a malware scan right after installation, in order to get the security assessment of your computer.
Scan results show the name, full path of infected file and type of each threat. You can either delete files or ignore threats, as well as apply an action to the current file or all of them. These log details can be saved to file for later examination.

Safe browsing and exploit mitigation
When it comes to safe browsing, HitmanPro.Alert protects your activities surrounding online banking, shopping or web mail. It offers support for many browsers, such as Internet Explorer, Chrome, Firefox, Opera, Maxthon, Comodo Dragon, Pale Moon, Tor Browser Bundle, Avant Browser, Spark Browser, SRWare Iron and Yandex Browser.

The feature dedicated to exploit mitigation prevents several third-party applications from current and future vulnerability attacks, like Java, VLC Media Player, Windows Media Player, Windows Media Center, Wordpad and Adobe Flash Player. Currently running processes that aren't supported by HitmanPro.Alert are shown in another panel, so you can at least be aware of risks.

Vaccination, CryptoGuard and webcam notifier
The software application sports additional tools to reduce the risk of malware infections. For instance, it can stop sandbox-aware malware by making the computer look like it belongs to a virus researcher, block crypto-ransomware (like CryptoLocker) by keeping local and shared files safe, or warn you when your webcam was silently turned on to watch you.

Keystroke encryption, process protection, network lockdown and USB blocker
Moreover, the program is able to encrypt all keystrokes to prevent keyloggers from hijacking your passwords, private messages and other sensitive information, prevent malware from infecting the main executable of a trusted process (e.g. antivirus), stop backdoor traffic by locking down the network, and block malicious USB devices that pose as a keyboard.

Download

Homepage : http://www.surfright.nl/en/alert

Changelog : https://www.hitmanpro.com/en-us/whatsnewalert.aspx
Share:

Unreal Commander 3.57 Build 1383

Unreal Commander

Unreal Commander is a real deal. Combining the best aspects of the most popular file managers in a single free application, it is a excellent alternative to the standard Windows file management tools! .

Unreal Commander's characteristics:

Two-panel interface
UNICODE support
Extended search of files
Multi-rename tool
Synchronization of directories
Support of archives ZIP, RAR, ACE, CAB, JAR, TAR, LHA, GZ, TGZ, ARJ
Built-in FTP client
Thumbnail mode
Folder tabs
Support of WLX/WCX/WDX plugins
Build-in viewer and quick view function
Network support
Drag and Drop Support
History and Hotlist functions
Copy/move/delete files background mode support
Deleting files with WIPE
Background pictures support
Visual styles: color categories of files, fonts for all interface elements
and more.


Homepage : https://x-diesel.com/

Changelog : https://x-diesel.com/?whatsnew
Share:

FIFA 19 Official Squads Updates 18/01/2019

FIFA 19 Squads Updates 2018/2019

FIFA 19 Squads Updates 2018/2019

FIFA 19 is an upcoming football simulation video game developed by EA Vancouver and EA Bucharest, as part of Electronic Arts' FIFA series. it will be released 28 September 2018 for PlayStation 3, PlayStation 4, Xbox 360, Xbox One, Nintendo Switch, and Microsoft Windows.

It will be the 26th instalment in the FIFA series. Cristiano Ronaldo appears as the cover athlete of the regular edition, while he and Neymar appear on the Champions and Ultimate Edition packs for the game.

This is official squads file of FIFA 19 downloaded from Origin. You can use this file to update your squads.


Installation : 

*Backup your original squad first !

1. Extract the file with WinRAR and copy all files to

Documents\FIFA 19\Settings

2. Now Play FIFA 19 via Origin and go to  Customise -> Profile -> Load Squads - Save Squads.

3. Done
Share:

Directory Opus 12.12

Directory Opus

Directory Opus

Are you frustrated by the limitations of Windows Explorer? Directory Opus provides a complete Explorer Replacement with far more power and functionality than any other file manager available today.

Just some of the features include:

- Single or dual pane file display and folder trees
- Tabbed interface let you keep multiple folders open and switch quickly between them
- Unique Explorer Replacement mode provides a full replacement for Windows Explorer
- Quickly filter, sort, group and search your folders
- Color-code your files, assign status icons, star ratings, tags and descriptions
- View images, documents and more. Image marking lets you sort your photos quickly and easily
- Batch renaming including easy-to-use keyboard macros
- View and edit file metadata
- Support for FTP and archive formats like Zip, 7Zip and RAR
- Built-in tools including synchronize and duplicate file finder
- Calculate folder sizes and print or export folder listings
- Queue multiple file copies for improved performance
- Fully configurable user interface - colors, fonts, toolbars, keyboard hotkeys, and a full scripting interface let you tailor Opus exactly to suit your needs
- Efficient, multi-threaded, modern design. Supports the latest 4K monitors. Available in both 32 and 64 bit versions.

Download

Homepage : https://www.gpsoft.com.au

Changelog : https://resource.dopus.com/c/New-Releases
Share:

BlueStacks Tweaker 5.9.0

BlueStacks

BlueStacks Tweaker

Bluestacks Tweaker is a portable application that is used to optimize BlueStacks Android Emulator. With BlueStacks Tweaker, you can get the following features :

- Change IMEI / AndroidID / Sim Serial Number
- Root BlueStacks easily
- Remove Ads in BlueStacks
- Remove Editor's Choice
- Change device model in BlueStacks 4
- And many more !

Download | Mirror

Homepage : https://bstweaker.tk/

Guide : https://bstweaker.tk/bstweaker

Changelog : https://bstweaker.tk/changelog

XDA Forum : https://forum.xda-developers.com/general/general/t3622681
Share:

Insurance News

Software Recommendation

Blog Archive